Trail & Allmountain

LITE MK2

29’’ Laufräder | 135 mm travel

The short-travel trail bike LITE MK2, featuring 135 mm of rear travel, takes the edge off even the most technical mid-mountain trails. Efficient on the climbs, confident on the descents, and ready for long days in the saddle.

 

Configure your LITE MK2

FEATURES

Select part

135 mm progressive travel

Our short-travel trail rocket features 135 mm of rear travel at the heart of the LITE frame.
Paired with a 210 × 55 mm shock, the rear suspension delivers 135 mm of finely tuned, progressive travel.

The result is a bike that feels light-footed, agile, and playful — efficient when accelerating, composed on technical trails, and offering exactly the right amount of reserves a modern trail bike demands.

79° pure power development

Trail bikes have become conservative all-rounders.
From relaxed rides and flowing trails to rough downhills, a modern trail bike has to handle it all.

That’s exactly what called for a mix between ZERO and DASH:
the steep seat angle of the DASH, combined with an active suspension platform and the lively character of the ZERO.

The result is a formula for pure riding fun — on trails, on tours, and wherever your ride takes you.

Optimized tubes and well balanced geometry

With its low center of gravity, the LITE always stays composed and planted on the trail.
At the same time, lighter square-section seatstays in the rear triangle and a butted down tube contribute to additional weight savings.

While size M does without a seat tube gusset, sizes L and XL are equipped with a slimmer, lightweight gusset to ensure optimal stiffness and durability.

Redesigned Link

Proven design meets new DNA.
As with the DASH, we exclusively use double-sealed, generously dimensioned bearings.
The linkage layout is now designed in line with our e-bike platform, further reducing bearing loads and significantly increasing durability.

The result is long-lasting, reliable performance with minimal maintenance requirements.
The concept is completed by internal cable routing, giving the LITE a clean and refined appearance.

Specifications

Material Aluminium 7020
Travel front / rear 140mm or 150mm / 135mm
Shock 210×55 mm / 22,2x8mm
seat tube diameter 30,9mm
Minimum insertion seatpost 100mm
seat clamp diameter 34,9mm
Headset ZS 44/56
Bottom Bracket BSA 73mm
Brake PM 180
max. brake disc size 203 mm
Rear hub width 12 x 148 mm
SRAM UDH Ready Yes
Bottle cage 2 x
ISCG05 Yes
Dropper Post Ready Yes
Fidlock Ready Yes
Max tire width 29″ x 2,5″
Weight  (Raw, Size M) 3,7 Kg
Weight Complete Bike
(Raw, Size L, Standard Configuration)
14,3 Kg

Geometry

S M L XL
Body Height 155  – 167,5 cm 165 – 177,5 cm 175 – 187,5 cm 185 – 197,5 cm
A – Horizontal Tube Length 524 554  586 618
B – Reach 415 445 475 505
C – Steering Angle 66°
D – Seat Angle 79°
E – Head Tube Length 110 110 120 130
F – Chain Stay Length 455
G – Wheel Base 1184 1214 1248 1282
H – Bottom Bracket Drop 40
I – Seat Tube Length 405 405 445 465
J – seatpost offset 12
K – Fork Length 551
L – Stack 625 625 634 643
M – Standover 797 798 799 799
max. seatpost insert 224 224 264 288

*All dimensions in mm unless otherwise stated, based on a 551 mm fork length

Galery

FAQ

Whats the biggest difference between LITE and DASH?

The Lite is similar in appearance to the Dash, but has less stroke at the rear, butted tubes and a geometry adapted to trail bikes. For example, the steering angle is slightly steeper, the reach is minimally shorter, so that the Lite creates a maneuverable character.

For anyone with more flow and a moderate pace, the LITE 290 is the perfect choice.
For anyone else whos looking for an enduro race bike, you should check our DASH models.

Which bottle cages can be used on the LITE?

It was important to us that you find enough space for bottles or minitools on the Lite MK2. Therefore, we have created enough space for bottle holders on the underside of the top tube and in front of the shock.
In the frame size M has a 450 ml bottle in front of the damper enough space, in the sizes L and XL even 600 ml.
At the top tube there is no restriction in terms of bottle size. With two Bottlecagemounts one is thus prepared for any trail adventure.

What does the Radiant Raw color mean?

Frames in Radiant Raw color are really raw, without clear coating.

The raw material may contain minor imperfections, which result of the production process of our supplier.

After welding, we use steel wool to finish our frames. This helps to remove small scratches that can occur during our production process. Since this needs almost some time, we have decided to make no difference in the price of our raw frames.

Of course, you can’t get every scratch out of the raw material. But because of this small imperfections the frame is not less valuable or should be sorted out for that reason. It would be very contrary to our idea of sustainability.

By the way : After a season full of riding, you can use some steel wool to finish the frame again. With new decals on, the frame looks shiny and new again!

You need spares?

Should you ever need a replacement chainstay protector or a new axle, then please check our category Accessories –> Parts or follow the link below to the Spares.

crossworld

Follow us

10,000 km on the Crossworx Ride280 – My Honest Verdict

Discover Story

Raphaela Richter joins Crossworx!

Raphaela | DASH290

Discover Story

Crossing the Atacama Desert to Reach the Summit of Ojos del Salado (Chile)

Peter / ZERO290

Discover Story

Crossworx Ride280 Long Distance Gravelbike Build

CrossWorx RIDE280

Discover Story

Craft Days 2023 – Projekt “Silberpfeil”

CrossWorx RIDE280

Discover Story

UCI Downhill Worldcup Lenzerheide

CrossWorx RADT Team / RUSH290

Discover Story

Crossworx auf dem IXS Dirtmasters 2023

CrossWorx @ Dirtmasters Festival Winterberg 2023

Discover Story

Craft Bike Days 2022 – CrossWorx LITE290 Special-Bike

CrossWorx LITE290

Discover Story

Crossworx crew ride

Discover Story

Payment Methods